Your Vehicle:
2010 Suzuki EQUATOR Click here to choose a new vehicle
Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Fuel Injection Throttle Body - Cardone Reman - Fuel Injection Throttle Body (Part Number: 67-0012)
- E-Waste: Yes
- FAQs: Do all throttle bodies have an ice breaker mode for extreme cold starts?
- FAQs: How do you clean?
- FAQs: The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module.
- FAQs: The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
- FAQs: We do not sell Throttle Body spacers nor do we recommend the use of a spacer.
- FAQs: How do you test?
- FAQs: Is there anything that has to be done after installing the replacement throttle body?
- FAQs: The OE throttle body has coolant hoses attached. What's the purpose?
- FAQs: What happens when an Electronic Throttle Body fails?
- FAQs: No bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
- FAQs: A relearn calibration procedure is necessary after installation of replacement throttle body.
- FAQs: Do you sell throttle body spacers?
- FAQs: Is it ok to bypass the coolant hoses?
- FAQs: Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
- FAQs: We use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore. For the exterior we use a glass bead blasting process. We also go through further disassembly for cleaning of internal components.
- FAQs: What do you replace?
- FAQs: What's an Electronic Throttle body?
- FAQs: Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
- FAQs: Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
- FAQs: What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
- FAQs: When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine's speed back to an idle rpm.
- FAQs: Position sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points.
- FAQs: The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both.
- FAQs: The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
- FAQs: We inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function.
- FAQs: What causes the Electronic Throttle Body to fail?
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Package Contents: Electronic Throttle Body, Instruction Sheet
- Product Condition: Remanufactured
- Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Application Summary: INFINITI QX56 2010-04 Nissan Armada 2015-05, Frontier 2020-05, NV1500 2021-12, NV2500 2021-12, NV3500 2021-12, Pathfinder 2012-05, Pathfinder Armada 2004, TITAN 2015-04, Xterra 2015-05 Suzuki Equator 2012-09
- AAIA Part Type Description: Fuel Injection Throttle Body
- Product Description - Invoice: Reman. Fuel Injection Throttle Body
- Key Search Words: Throttle Body, Throttle, Fuel Injection Throttle Body, Intake, Air Intake, Throttle Valve, Carburetor, Manifold, TBI, ETB, Electronic Throttle Body, Mechanical Throttle Body, Throttle Bore, Throttle Blade
- Label Description: Remanufactured Fuel Injection Throttle Body
- Marketing Description: Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
- Short Product Description: Throttle Body
- CTO: US
- Emission Code: 1
- Canadian Harmonizing Tariff Code: 8481800081
- Harmonized Tariff Code (Schedule B): 8481809035
- Harmonized Tariff Code (HTS): 8481809020
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- Maximum Cases per Pallet Layer: 35
- Pallet Layer Maximum: 7
- Remanufactured Part: Y
- Warranty Distance: 18000
- Warranty Distance UOM: MI
- Warranty Special UOM: TX
- Warranty Time: 12
- Warranty Time UOM: MO
- Manufacturer:
- Cardone Reman
- Part Number:
- 67-0012
- Manufacturer Part Number:
- 67-0012
- Description:
- Fuel Injection Throttle Body
- Long Description:
- Fuel Injection Throttle Body
- Part Type:
- Fuel Injection Throttle Body
- Category:
- Air And Fuel Delivery
- Subcategory:
- Fuel Injection System And Related Components
- Warehouse Notes:
- THROTTLE BODY
- Sales Rank:
Product Details
- Core Price:
- $ 31.11
- Condition:
- Remanufactured
- Product Fit:
- Direct Fit
- Weight:
- 2.54 lbs.
- Height:
- 5.25"
- Width:
- 6.125"
- Length:
- 6.125"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 884548129290
Technical Details
- E-Waste
- Yes
- FAQs
- Do all throttle bodies have an ice breaker mode for extreme cold starts?
- FAQs
- How do you clean?
- FAQs
- The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module.
- FAQs
- The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
- FAQs
- We do not sell Throttle Body spacers nor do we recommend the use of a spacer.
- FAQs
- How do you test?
- FAQs
- Is there anything that has to be done after installing the replacement throttle body?
- FAQs
- The OE throttle body has coolant hoses attached. What's the purpose?
- FAQs
- What happens when an Electronic Throttle Body fails?
- FAQs
- No bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
- FAQs
- A relearn calibration procedure is necessary after installation of replacement throttle body.
- FAQs
- Do you sell throttle body spacers?
- FAQs
- Is it ok to bypass the coolant hoses?
- FAQs
- Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
- FAQs
- We use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore. For the exterior we use a glass bead blasting process. We also go through further disassembly for cleaning of internal components.
- FAQs
- What do you replace?
- FAQs
- What's an Electronic Throttle body?
- FAQs
- Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
- FAQs
- Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
- FAQs
- What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
- FAQs
- When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine's speed back to an idle rpm.
- FAQs
- Position sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points.
- FAQs
- The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both.
- FAQs
- The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
- FAQs
- We inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function.
- FAQs
- What causes the Electronic Throttle Body to fail?
- Housing Color/Finish
- Gray/Unfinished
- Housing Material
- Aluminum
- Package Contents
- Electronic Throttle Body, Instruction Sheet
- Product Condition
- Remanufactured
- Product Line Marketing Stmt
- After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Throttle Body Actuation Type
- Electric
- Throttle Body Inlet Shape
- Round
- Throttle Body Outlet Shape
- Round
- Throttle Position Sensor Included
- Yes
- Application Summary
- INFINITI QX56 2010-04 Nissan Armada 2015-05, Frontier 2020-05, NV1500 2021-12, NV2500 2021-12, NV3500 2021-12, Pathfinder 2012-05, Pathfinder Armada 2004, TITAN 2015-04, Xterra 2015-05 Suzuki Equator 2012-09
- AAIA Part Type Description
- Fuel Injection Throttle Body
- Product Description - Invoice
- Reman. Fuel Injection Throttle Body
- Key Search Words
- Throttle Body, Throttle, Fuel Injection Throttle Body, Intake, Air Intake, Throttle Valve, Carburetor, Manifold, TBI, ETB, Electronic Throttle Body, Mechanical Throttle Body, Throttle Bore, Throttle Blade
- Label Description
- Remanufactured Fuel Injection Throttle Body
- Marketing Description
- Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
- Short Product Description
- Throttle Body
- CTO
- US
- Emission Code
- 1
- Canadian Harmonizing Tariff Code
- 8481800081
- Harmonized Tariff Code (Schedule B)
- 8481809035
- Harmonized Tariff Code (HTS)
- 8481809020
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- Maximum Cases per Pallet Layer
- 35
- Pallet Layer Maximum
- 7
- Remanufactured Part
- Y
- Warranty Distance
- 18000
- Warranty Distance UOM
- MI
- Warranty Special UOM
- TX
- Warranty Time
- 12
- Warranty Time UOM
- MO
Specifications
The CARDONE REMAN Fuel Injection Throttle Body contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2010 | Suzuki | Equator | 4.0L | [Remanufactured Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.