To make sure this part does fit your vehicle Check The Fit
Engine Intake Manifold - Dorman Oe Solutions - Engine Intake Manifold (Part Number: 615-311)
- CTO: US
- Emission Code: 1
- Harmonized Tariff Code (Schedule B): 7326908695
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- PRC: NEW
- APS: Jeep 2023-14, Ram 2023-14
- Application Summary: Jeep 2023-14, Ram 2023-14
- Key Search Words: Engine, Intake, Manifold, Manifolds
- KSW: Engine, Intake, Manifold, Manifolds
- Label Description: ENGINE INTAKE MANIFOLD
- Marketing Description: On certain vehicles with Chrysler EcoDiesel V6 engines, soot buildup in the intake manifold can cause a severe loss of power, smoke, and a burning smell. A dealer recall addresses failing EGR coolers on some EcoDiesels, but even if a cooler has been repaired under warranty, it may have already caused problems downstream that aren't immediately noticeable. Soot can accumulate inside the manifold, preventing proper operation of the IMRC system, while regeneration cycles to help clean the diesel particulate filter add even more soot and heat from the EGR system. Ultimately the soot buildup acts as an insulator, causing trapped heat to warp the manifold and create a leak. Manifold runners and the MAP sensor can also be damaged or melted, creating a burning polymer residue that adds to the fouling of the IMRC system. This upgraded Dorman OE FIX intake manifold features a deeper, more protective skirt on the sensor shroud, allowing the MAP sensor to be located farther out of the path of hot EGR gases. These engineering improvements can more effectively divert EGR heat and soot through the intake for a more reliable repair than the original design. This manifold can also help reduce cost by allowing still-functional sensors to be swapped into the new manifold, vs. the OEM replacement which can only be purchased with the MAP sensor, IMRC motor, and both runner sensors.
- Short Product Description: Intake Manifold
- Slang Description: Plenum
- SLD: Plenum
- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Center Maximum Height: 6 IN
- CNC Ported: No
- Color: Black
- Deck Height: 5 IN
- EGR Ready: Yes
- Front Maximum Height: 6.7 IN
- Gasket Or Seal Included: Yes
- Grade Type: Regular
- Heated Choke Port: No
- High-Riser: No
- Installation Instructions Included: No
- Length: 15 IN
- Manifold Height: 6.7 in IN
- Material: Plastic
- Mounting Hole Diameter: 0.125 IN
- Mounting Hole Quantity: 11
- Package Contents: 1 Intake Manifold
- Port Outlet Dimensions: 2.5
- Port Quantity: 12
- Rear Maximum Height: 6.7 IN
- Single Or Dual Plane Type: Single Plane
- Street Legal: Yes
- Width: 7 IN
- Manufacturer:
- Dorman Oe Solutions
- Part Number:
- 615-311
- Manufacturer Part Number:
- 615-311
- Description:
- Engine Intake Manifold
- Long Description:
- Engine Intake Manifold
- Part Type:
- Engine Intake Manifold
- Category:
- Engine
- Subcategory:
- Cylinder Block Components
- Warehouse Notes:
- INTAKE MANIFOLD
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 4.55 lbs.
- Height:
- 8.25"
- Width:
- 7.75"
- Length:
- 7.75"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 889245688521
- Position:
- Upper
Technical Details
- CTO
- US
- Emission Code
- 1
- Harmonized Tariff Code (Schedule B)
- 7326908695
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- PRC
- NEW
- APS
- Jeep 2023-14, Ram 2023-14
- Application Summary
- Jeep 2023-14, Ram 2023-14
- Key Search Words
- Engine, Intake, Manifold, Manifolds
- KSW
- Engine, Intake, Manifold, Manifolds
- Label Description
- ENGINE INTAKE MANIFOLD
- Marketing Description
- On certain vehicles with Chrysler EcoDiesel V6 engines, soot buildup in the intake manifold can cause a severe loss of power, smoke, and a burning smell. A dealer recall addresses failing EGR coolers on some EcoDiesels, but even if a cooler has been repaired under warranty, it may have already caused problems downstream that aren't immediately noticeable. Soot can accumulate inside the manifold, preventing proper operation of the IMRC system, while regeneration cycles to help clean the diesel particulate filter add even more soot and heat from the EGR system. Ultimately the soot buildup acts as an insulator, causing trapped heat to warp the manifold and create a leak. Manifold runners and the MAP sensor can also be damaged or melted, creating a burning polymer residue that adds to the fouling of the IMRC system. This upgraded Dorman OE FIX intake manifold features a deeper, more protective skirt on the sensor shroud, allowing the MAP sensor to be located farther out of the path of hot EGR gases. These engineering improvements can more effectively divert EGR heat and soot through the intake for a more reliable repair than the original design. This manifold can also help reduce cost by allowing still-functional sensors to be swapped into the new manifold, vs. the OEM replacement which can only be purchased with the MAP sensor, IMRC motor, and both runner sensors.
- Short Product Description
- Intake Manifold
- Slang Description
- Plenum
- SLD
- Plenum
- Air Conditioning Compressor Mount
- No
- Alternator Mount
- No
- Center Maximum Height
- 6 IN
- CNC Ported
- No
- Color
- Black
- Deck Height
- 5 IN
- EGR Ready
- Yes
- Front Maximum Height
- 6.7 IN
- Gasket Or Seal Included
- Yes
- Grade Type
- Regular
- Heated Choke Port
- No
- High-Riser
- No
- Installation Instructions Included
- No
- Length
- 15 IN
- Manifold Height
- 6.7 in IN
- Material
- Plastic
- Mounting Hole Diameter
- 0.125 IN
- Mounting Hole Quantity
- 11
- Package Contents
- 1 Intake Manifold
- Port Outlet Dimensions
- 2.5
- Port Quantity
- 12
- Rear Maximum Height
- 6.7 IN
- Single Or Dual Plane Type
- Single Plane
- Street Legal
- Yes
- Width
- 7 IN
Specifications
The DORMAN OE SOLUTIONS Engine Intake Manifold contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2023 | Ram | 1500 | 3.0L | [Engine Intake Manifold] Upper; DIESEL; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.