Your Vehicle: 1997 Ford F 59 COMMERCIAL STRIPPED CHASS Click here to choose a new vehicle

This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

CARDONE REMAN - Diesel Fuel Injector Driver Module - A1C 78-2001

‹ ›

Diesel Fuel Injector Driver Module - Cardone Reman - Diesel Fuel Injector Driver Module (Part Number: 78-2001)

Manufacturer:: Cardone Reman
Part Number:: 78-2001
Manufacturer Part Number:: 78-2001
Description:: Diesel Fuel Injector Driver Module
Long Description:: Diesel Fuel Injector Driver Module
Part Type:: Diesel Fuel Injector Driver Module
Category:: Air And Fuel Delivery
Subcategory:: Fuel Injection System And Related Components
Warehouse Notes:: INJ. DRIVER MODULE - FUEL INJ MODULE
Sales Rank:

Core Price:: $ 97.22
Condition:: Remanufactured
Product Fit:: Direct Fit
Weight:: 4.55 lbs.
Height:: 4.125"
Width:: 9.125"
Length:: 9.125"
UOM:: EA
Quantity Sold:: Sold individually
Qty Per Application:: 1
Minimum Order Qty:: 1
Item GTIN:: 082617751100

Connector/Terminal Configuration: Pin/Male
E-Waste: Yes
FAQs: No, not all Ford vehicles require a PATS reset. Check the PATS chart found on the MotorCraft Site for your application.
FAQs: What steps should I take to assure the original ecm/pcm is causing the issue?
FAQs: Chrysler PCM's identified with a \"V\" suffix will need to be vin programmed.
FAQs: Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common areas that cause failures are: poor grounds and powers, bad wiring harness, shorted solenoids/relays.
FAQs: The replacement ECM for a Ford vehicle won't start the vehicle. Why?
FAQs: I replaced the PCM in my GM vehicle. Do I need to reset the Passlock or Passkey Vehicle Anti Theft System (VATS)?
FAQs: The wrong ECM may have been installed. Verify the Ford Engineering Id number, found on the ECM/PCM, crosses to the correct CARDONE number.
FAQs: Do all Chrysler Power Train Control Modules (PCM) need vin programming?
FAQs: Do all Ford vehicles require a Passive Anti Theft System (P.A.T.S) reset?
FAQs: Yes, there's a 10 minute procedure utilizing a Tech 2 Scanner and a GM Terminal Subscription. There is also a 30 minute manual procedure that can be done without a scanner. Refer to an OE approved service manual for either option.
Housing Color/Finish: Gray
Housing Material: Metal
Package Contents: Injector Driver Module
Product Condition: Remanufactured
Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
CTO: US
Emission Code: 1
Canadian Harmonizing Tariff Code: 8543700000
Harmonized Tariff Code (Schedule B): 8543709665
Harmonized Tariff Code (HTS): 8543709860
Life Cycle Status Code: 2
Life Cycle Status Description: Available to Order
SDR Required Flag: N
Maximum Cases per Pallet Layer: 49
Pallet Layer Maximum: 4
Remanufactured Part: Y
Warranty Distance: 18000
Warranty Distance UOM: MI
Warranty Special UOM: TX
Warranty Time: 12
Warranty Time UOM: MO
Application Summary: Ford E-350 Econoline 1998-94, E-350 Econoline Club Wagon 1999-94, E-350 Super Duty 1999, E-450 Econoline Super Duty 1999, Econoline Super Duty 1999-96, F-250 1996-94, F-250 Super Duty 1999, F-350 1997-94, F-350 Super Duty 1999, F-450 Super Duty 1999, F-550 Super Duty 1999, F-59 Commercial Stripped Chassis 1997-94, F-Super Duty 1997-94
AAIA Part Type Description: Diesel Fuel Injector Driver Module
Product Description - Invoice: Reman. Diesel Fuel Inj Driver Module
Key Search Words: Injector Driver Module, Module, Computer, IDM
Label Description: Remanufactured Diesel Fuel Injector Driver Module
Marketing Description: CARDONE Remanufactured Injector Driver Modules are engineered for quick installation and no comebacks. Each unit is engineered to meet or exceed OEM performance. All modules are 100% computerized tested and resolder of critical components, as well as 100% replacement of common ware components, ensuring superior electrical connections.
Short Product Description: Inj. Driver Module

The CARDONE REMAN Diesel Fuel Injector Driver Module contains no remanufactured components, and is designed to operate in either city or highway driving.

Year	Make	Model	Engine	Notes
1997	Ford	F-59 Commercial Stripped Chass	7.3L	[Remanufactured Diesel Fuel Injector Driver Module] Quantity needed per vehicle: 1
1997	Ford	F-59 Commercial Stripped Chass	7.3L	[Remanufactured Diesel Fuel Injector Driver Module] Quantity needed per vehicle: 1
1997	Ford	F-59 Commercial Stripped Chass	7.3L	[Remanufactured Diesel Fuel Injector Driver Module] Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.

Under NO circumstances will our liability exceed the amount of the original sale.

Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.

The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.

All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.

Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.

Diesel Fuel Injector Driver Module - Cardone Reman - Diesel Fuel Injector Driver Module (Part Number: 78-2001)

Price: $ 544.20

Availability: Call for Availability

Product Details

Technical Details

Specifications

Warranty Information

Can't find what you are looking for? Try searching by one of these methods below.