To make sure this part does fit your vehicle Check The Fit
Wheel Bearing Race - Timken - Tapered Roller Bearing Cup (Part Number: 28622)
- Application Summary: FW-RWD INT TK (1972-81), FW-4WD DOD TK 1 (1957-58), RW-RWD CHE TK 1/2 (1964-69), CHE TK 3/4 (1965-72
- Product Description - Invoice: Tapered Roller Bearing Cup
- Marketing Description: Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
- Marketing Description: Timken is the recognized global leader in tapered roller bearings.
- Marketing Description: With capacity to manage both radial and axial loads, high performance Timken tapered roller bearing components are engineered to provide the greatest durability in the most compact space.
- Marketing Description: Engineered to deliver higher speeds, heavier loads and longer life
- Marketing Description: www.timkeninfo.com
- Short Product Description: TAPERED BEARING CUP
- Harmonized Tariff Code (Schedule B): 8482991550
- Life Cycle Status Code: 4
- NPS: B
- Quantity per Application: 2
- Manufacturer:
- Timken
- Part Number:
- 28622
- Manufacturer Part Number:
- 28622
- Description:
- Wheel Bearing Race
- Long Description:
- Tapered Roller Bearing Cup
- Part Type:
- Wheel Bearing Race
- Category:
- Driveline And Axles
- Subcategory:
- Wheel Bearings Seals And Related Components
- Warehouse Notes:
- TAPER CUP - REAR INNER RACE
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.697 lbs.
- Height:
- 1.36"
- Width:
- 4.08"
- Length:
- 4.08"
- UOM:
- PC
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 2
- Minimum Order Qty:
- 1
- Item GTIN:
- 053893232539
- Position:
- Rear Inner
Technical Details
- Application Summary
- FW-RWD INT TK (1972-81), FW-4WD DOD TK 1 (1957-58), RW-RWD CHE TK 1/2 (1964-69), CHE TK 3/4 (1965-72
- Product Description - Invoice
- Tapered Roller Bearing Cup
- Marketing Description
- Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
- Marketing Description
- Timken is the recognized global leader in tapered roller bearings.
- Marketing Description
- With capacity to manage both radial and axial loads, high performance Timken tapered roller bearing components are engineered to provide the greatest durability in the most compact space.
- Marketing Description
- Engineered to deliver higher speeds, heavier loads and longer life
- Marketing Description
- www.timkeninfo.com
- Short Product Description
- TAPERED BEARING CUP
- Harmonized Tariff Code (Schedule B)
- 8482991550
- Life Cycle Status Code
- 4
- NPS
- B
- Quantity per Application
- 2
Specifications
The TIMKEN Wheel Bearing Race contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2008 | Dodge | Ram 2500 | 4.7L | [Wheel Race] Rear Inner; Quantity needed per vehicle: 2 |
| 2008 | Dodge | Ram 2500 | 5.7L | [Wheel Race] Rear Inner; Quantity needed per vehicle: 2 |
| 2008 | Dodge | Ram 2500 | 5.9L | [Wheel Race] Rear Inner; Quantity needed per vehicle: 2 |
| 2008 | Dodge | Ram 2500 | 6.7L | [Wheel Race] Rear Inner; Quantity needed per vehicle: 2 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.