To make sure this part does fit your vehicle Check The Fit
Universal Joint - Acdelco Gold/professional - U-JOINT (Part Number: 45U0103)
- Bearing Cap Axis 1 Diameter: 1.188 IN
- Bearing Cap Axis 2 Diameter: 1.188 IN
- Bearing Cap Type: Plain Round
- Grade Type: Performance
- Grease Fitting Location: In Cross
- Greaseable: Yes
- Inside Yoke Lock-Up: Yes
- Length Axis 1: 3.625 IN
- Length Axis 2: 3.625 IN
- Lock Ring Location: End Of Cap
- Material: Steel
- Mounting Hardware Included: Yes
- Outside Yoke Lock Up: No
- Snap Rings Included: Yes
- Solid Shaft: No
- Type: Plain Round
- Width Including Clips Axis 1: 1.5 IN
- Width Including Clips Axis 2: 1.5 IN
- CTO: CN
- CTP: US
- Harmonized Tariff Code (HTS): 8708996810
- Life Cycle Status Code: 4
- Life Cycle Status Description: Announced
- Maximum Cases per Pallet Layer: 14
- Pallet Layer Maximum: 6
- Warranty Special UOM: TX
- Application Summary: AM GeneralBuickCadillacChevroletChevroletDodgeFordFordGMCGMCHummerInfinitiInternationalJeepLincolnMercuryNissanOldsmobilePontiacRamRamRolls-RoyceRoverSaabSRTToyota
- AAIA Part Type Description: Universal Joint
- Manufacturer:
- Acdelco Gold/professional
- Part Number:
- 45U0103
- Manufacturer Part Number:
- 45U0103
- Description:
- Universal Joint
- Long Description:
- U-JOINT
- Part Type:
- Universal Joint
- Category:
- Driveline And Axles
- Subcategory:
- Drive Shaft
- Warehouse Notes:
- JOINT KITP - REAR JOINT
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 1.6 lbs.
- Height:
- 1.5"
- Width:
- 3.7"
- Length:
- 3.7"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Position:
- Rear Shaft
Technical Details
- Bearing Cap Axis 1 Diameter
- 1.188 IN
- Bearing Cap Axis 2 Diameter
- 1.188 IN
- Bearing Cap Type
- Plain Round
- Grade Type
- Performance
- Grease Fitting Location
- In Cross
- Greaseable
- Yes
- Inside Yoke Lock-Up
- Yes
- Length Axis 1
- 3.625 IN
- Length Axis 2
- 3.625 IN
- Lock Ring Location
- End Of Cap
- Material
- Steel
- Mounting Hardware Included
- Yes
- Outside Yoke Lock Up
- No
- Snap Rings Included
- Yes
- Solid Shaft
- No
- Type
- Plain Round
- Width Including Clips Axis 1
- 1.5 IN
- Width Including Clips Axis 2
- 1.5 IN
- CTO
- CN
- CTP
- US
- Harmonized Tariff Code (HTS)
- 8708996810
- Life Cycle Status Code
- 4
- Life Cycle Status Description
- Announced
- Maximum Cases per Pallet Layer
- 14
- Pallet Layer Maximum
- 6
- Warranty Special UOM
- TX
- Application Summary
- AM GeneralBuickCadillacChevroletChevroletDodgeFordFordGMCGMCHummerInfinitiInternationalJeepLincolnMercuryNissanOldsmobilePontiacRamRamRolls-RoyceRoverSaabSRTToyota
- AAIA Part Type Description
- Universal Joint
Specifications
The ACDELCO GOLD/PROFESSIONAL Universal Joint contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1961 | Dodge | W100 Series | 3.7L | [Universal Joint] Front Wheels All Joints; Quantity needed per vehicle: 2 |
| 1961 | Dodge | W100 Series | 5.2L | [Universal Joint] Front Wheels All Joints; Quantity needed per vehicle: 2 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.